Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design

Fan Zhang; Giuliano Premier; Jon Maddy; Alan Guwy; Kary Thanapalan

doi:10.1109/ICICIP.2011.6008413

Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design

Fan Zhang, Giuliano Premier, Jon Maddy, Alan Guwy, Kary Thanapalan

Faculty of Computing, Engineering and Science

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this paper a control-oriented PEM fuel cell system model and a repetitive controller design strategy for PEM fuel cell systems is discussed. A mathematical model of a Polymer Electrolyte Membrane (PEM) Fuel Cell system is presented and then used to design the controller intended to improve system performance. The PEM Fuel cell is tested on an available test station (PEM-FCT) and the data used for the modelling and subsequent controller development study. For model validation a comparison is made between the results from a MATLAB/Simulink model and the test data from the PEM-FCT. The model is then used for repetitive controller design for the fuel cell system. Simulation results show that the repetitive controller tracks the reference signal very closely, with little deviation from the desired value.

Original language	English
Title of host publication	Proceedings of the 2nd International Conference on Intelligent Control and Information Processing
Subtitle of host publication	25-28 July 201, Harbin China
Place of Publication	China
Publisher	Institute of Electrical and Electronics Engineers
Pages	1055-1060
Number of pages	6
Volume	2
ISBN (Print)	978-1-4577-0814-5
DOIs	https://doi.org/10.1109/ICICIP.2011.6008413
Publication status	Published - 1 Sept 2011
Event	Intelligent Control and Information Processing (ICICIP), 2011 2nd International Conference - Harbin Duration: 25 Jul 2011 → 28 Jul 2011

Conference

Conference	Intelligent Control and Information Processing (ICICIP), 2011 2nd International Conference
Period	25/07/11 → 28/07/11

Keywords

pem fuel cell
system modeling
repetitive controller design

Access to Document

10.1109/ICICIP.2011.6008413Licence: CC BY-NC-ND

Cite this

Zhang, F., Premier, G., Maddy, J., Guwy, A., & Thanapalan, K. (2011). Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design. In Proceedings of the 2nd International Conference on Intelligent Control and Information Processing: 25-28 July 201, Harbin China (Vol. 2, pp. 1055-1060). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ICICIP.2011.6008413

@inproceedings{81ad18e80bae49d2b5612f306672142c,

title = "Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design",

abstract = "In this paper a control-oriented PEM fuel cell system model and a repetitive controller design strategy for PEM fuel cell systems is discussed. A mathematical model of a Polymer Electrolyte Membrane (PEM) Fuel Cell system is presented and then used to design the controller intended to improve system performance. The PEM Fuel cell is tested on an available test station (PEM-FCT) and the data used for the modelling and subsequent controller development study. For model validation a comparison is made between the results from a MATLAB/Simulink model and the test data from the PEM-FCT. The model is then used for repetitive controller design for the fuel cell system. Simulation results show that the repetitive controller tracks the reference signal very closely, with little deviation from the desired value.",

keywords = "pem fuel cell, system modeling, repetitive controller design",

author = "Fan Zhang and Giuliano Premier and Jon Maddy and Alan Guwy and Kary Thanapalan",

year = "2011",

month = sep,

day = "1",

doi = "10.1109/ICICIP.2011.6008413",

language = "English",

isbn = "978-1-4577-0814-5",

volume = "2",

pages = "1055--1060",

booktitle = "Proceedings of the 2nd International Conference on Intelligent Control and Information Processing",

publisher = "Institute of Electrical and Electronics Engineers",

note = " Intelligent Control and Information Processing (ICICIP), 2011 2nd International Conference ; Conference date: 25-07-2011 Through 28-07-2011",

}

Zhang, F, Premier, G, Maddy, J , Guwy, A & Thanapalan, K 2011, Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design. in Proceedings of the 2nd International Conference on Intelligent Control and Information Processing: 25-28 July 201, Harbin China. vol. 2, Institute of Electrical and Electronics Engineers, China, pp. 1055-1060, Intelligent Control and Information Processing (ICICIP), 2011 2nd International Conference, 25/07/11. https://doi.org/10.1109/ICICIP.2011.6008413

Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design. / Zhang, Fan; Premier, Giuliano; Maddy, Jon et al.
Proceedings of the 2nd International Conference on Intelligent Control and Information Processing: 25-28 July 201, Harbin China. Vol. 2 China: Institute of Electrical and Electronics Engineers, 2011. p. 1055-1060.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design

AU - Zhang, Fan

AU - Premier, Giuliano

AU - Maddy, Jon

AU - Guwy, Alan

AU - Thanapalan, Kary

PY - 2011/9/1

Y1 - 2011/9/1

N2 - In this paper a control-oriented PEM fuel cell system model and a repetitive controller design strategy for PEM fuel cell systems is discussed. A mathematical model of a Polymer Electrolyte Membrane (PEM) Fuel Cell system is presented and then used to design the controller intended to improve system performance. The PEM Fuel cell is tested on an available test station (PEM-FCT) and the data used for the modelling and subsequent controller development study. For model validation a comparison is made between the results from a MATLAB/Simulink model and the test data from the PEM-FCT. The model is then used for repetitive controller design for the fuel cell system. Simulation results show that the repetitive controller tracks the reference signal very closely, with little deviation from the desired value.

AB - In this paper a control-oriented PEM fuel cell system model and a repetitive controller design strategy for PEM fuel cell systems is discussed. A mathematical model of a Polymer Electrolyte Membrane (PEM) Fuel Cell system is presented and then used to design the controller intended to improve system performance. The PEM Fuel cell is tested on an available test station (PEM-FCT) and the data used for the modelling and subsequent controller development study. For model validation a comparison is made between the results from a MATLAB/Simulink model and the test data from the PEM-FCT. The model is then used for repetitive controller design for the fuel cell system. Simulation results show that the repetitive controller tracks the reference signal very closely, with little deviation from the desired value.

KW - pem fuel cell

KW - system modeling

KW - repetitive controller design

U2 - 10.1109/ICICIP.2011.6008413

DO - 10.1109/ICICIP.2011.6008413

M3 - Conference contribution

SN - 978-1-4577-0814-5

VL - 2

SP - 1055

EP - 1060

BT - Proceedings of the 2nd International Conference on Intelligent Control and Information Processing

PB - Institute of Electrical and Electronics Engineers

CY - China

T2 - Intelligent Control and Information Processing (ICICIP), 2011 2nd International Conference

Y2 - 25 July 2011 through 28 July 2011

ER -

Zhang F, Premier G, Maddy J , Guwy A, Thanapalan K. Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design. In Proceedings of the 2nd International Conference on Intelligent Control and Information Processing: 25-28 July 201, Harbin China. Vol. 2. China: Institute of Electrical and Electronics Engineers. 2011. p. 1055-1060 doi: 10.1109/ICICIP.2011.6008413

Control-Oriented PEM Fuel Cell System Modeling and Repetitive Controller Design

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this