Ultra-Compact mm-Wave Monolithic IC Doherty Power Amplifier for Mobile Handsets

Maryam Sajedin*, Issa Elfergani*, Jonathan Rodriguez, Raed Abd-Alhameed, Monica Fernandez-Barciela, Manuel Violas

*Awdur cyfatebol y gwaith hwn

Allbwn ymchwil: Cyfraniad at gyfnodolynErthygladolygiad gan gymheiriaid

96 Wedi eu Llwytho i Lawr (Pure)


This work develops a novel dynamic load modulation Power Amplifier (PA) circuity that can provide an optimum compromise between linearity and efficiency while covering multiple cellular frequency bands. Exploiting monolithic microwave integrated circuits (MMIC) technology, a fully integrated 1W Doherty PA architecture is proposed based on 0.1 μm AlGaAs/InGaAs Depletion-Mode (D-Mode) technology provided by the WIN Semiconductors foundry. The proposed wideband DPA incorporates the harmonic tuning Class-J mode of operation, which aims to engineer the voltage waveform via second harmonic capacitive load termination. Moreover, the applied post-matching technique not only reduces the impedance transformation ratio of the conventional DPA, but also restores its proper load modulation. The simulation results indicate that the monolithic drive load modulation PA at 4 V operation voltage delivers 44% PAE at the maximum output power of 30 dBm at the 1 dB compression point, and 34% power-added efficiency (PAE) at 6 dB power back-off (PBO). A power gain flatness of around 14 ± 0.5 dB was achieved over the frequency band of 23 GHz to 27 GHz. The compact MMIC load modulation technique developed for the 5G mobile handset occupies the die area of 3.2 mm2.
Iaith wreiddiolSaesneg
Rhif yr erthygle2131
Rhif cyhoeddi17
Dyddiad ar-lein cynnar2 Medi 2021
Dynodwyr Gwrthrych Digidol (DOIs)
StatwsE-gyhoeddi cyn argraffu - 2 Medi 2021

Ôl bys

Gweld gwybodaeth am bynciau ymchwil 'Ultra-Compact mm-Wave Monolithic IC Doherty Power Amplifier for Mobile Handsets'. Gyda’i gilydd, maen nhw’n ffurfio ôl bys unigryw.

Dyfynnu hyn