Stability Analysis and Stabilization of a Class of Cutting Systems With Chatter Suppression

Hao-Fei Meng; Yu Kang; Zhiyong Chen; Yun-Bo Zhao; G-P Liu

doi:10.1109/TMECH.2014.2319825

Stability Analysis and Stabilization of a Class of Cutting Systems With Chatter Suppression

Hao-Fei Meng^*, Yu Kang, Zhiyong Chen, Yun-Bo Zhao, G-P Liu

^*Awdur cyfatebol y gwaith hwn

Cyfadran Cyfrifiadureg, Peirianneg a Gwyddoniaeth

Allbwn ymchwil: Cyfraniad at gyfnodolyn › Erthygl › adolygiad gan gymheiriaid

Crynodeb

In this paper, a new method for stability analysis of a single degree of freedom (SDOF) cutting system with sinusoidal spindle speed variation (SSSV) is proposed. Based on the approximately periodic property of the time delay in the turning process and the delay decomposition method, novel criteria of stability analysis for an SDOF cutting system are presented. Moreover, a state feedback controller is designed to stabilize the system and improve the steady-state response. Numerical simulation shows the effectiveness of the method.

Iaith wreiddiol	Saesneg
Tudalennau (o-i)	991-996
Nifer y tudalennau	6
Cyfnodolyn	IEEE/ASME Transactions on Mechatronics
Cyfrol	20
Rhif cyhoeddi	2
Dynodwyr Gwrthrych Digidol (DOIs)	https://doi.org/10.1109/TMECH.2014.2319825
Statws	Cyhoeddwyd - Ebr 2015

Mynediad at Ddogfen

10.1109/TMECH.2014.2319825Trwydded: CC BY-NC-ND

Dyfynnu hyn

@article{bcfe38c2d36f40fb90c934de4a2f4d52,

title = "Stability Analysis and Stabilization of a Class of Cutting Systems With Chatter Suppression",

abstract = "In this paper, a new method for stability analysis of a single degree of freedom (SDOF) cutting system with sinusoidal spindle speed variation (SSSV) is proposed. Based on the approximately periodic property of the time delay in the turning process and the delay decomposition method, novel criteria of stability analysis for an SDOF cutting system are presented. Moreover, a state feedback controller is designed to stabilize the system and improve the steady-state response. Numerical simulation shows the effectiveness of the method.",

keywords = "Chatter suppression, cutting systems, spindle speed variation (SSV), time-delay systems, SPINDLE SPEED VARIATION, TOOL WEAR, METHODOLOGY",

author = "Hao-Fei Meng and Yu Kang and Zhiyong Chen and Yun-Bo Zhao and G-P Liu",

year = "2015",

month = apr,

doi = "10.1109/TMECH.2014.2319825",

language = "English",

volume = "20",

pages = "991--996",

journal = "IEEE/ASME Transactions on Mechatronics",

issn = "1083-4435",

publisher = "Institute of Electrical and Electronics Engineers",

number = "2",

}

TY - JOUR

T1 - Stability Analysis and Stabilization of a Class of Cutting Systems With Chatter Suppression

AU - Meng, Hao-Fei

AU - Kang, Yu

AU - Chen, Zhiyong

AU - Zhao, Yun-Bo

AU - Liu, G-P

PY - 2015/4

Y1 - 2015/4

N2 - In this paper, a new method for stability analysis of a single degree of freedom (SDOF) cutting system with sinusoidal spindle speed variation (SSSV) is proposed. Based on the approximately periodic property of the time delay in the turning process and the delay decomposition method, novel criteria of stability analysis for an SDOF cutting system are presented. Moreover, a state feedback controller is designed to stabilize the system and improve the steady-state response. Numerical simulation shows the effectiveness of the method.

AB - In this paper, a new method for stability analysis of a single degree of freedom (SDOF) cutting system with sinusoidal spindle speed variation (SSSV) is proposed. Based on the approximately periodic property of the time delay in the turning process and the delay decomposition method, novel criteria of stability analysis for an SDOF cutting system are presented. Moreover, a state feedback controller is designed to stabilize the system and improve the steady-state response. Numerical simulation shows the effectiveness of the method.

KW - Chatter suppression

KW - cutting systems

KW - spindle speed variation (SSV)

KW - time-delay systems

KW - SPINDLE SPEED VARIATION

KW - TOOL WEAR

KW - METHODOLOGY

U2 - 10.1109/TMECH.2014.2319825

DO - 10.1109/TMECH.2014.2319825

M3 - Article

SN - 1083-4435

VL - 20

SP - 991

EP - 996

JO - IEEE/ASME Transactions on Mechatronics

JF - IEEE/ASME Transactions on Mechatronics

IS - 2

ER -

Stability Analysis and Stabilization of a Class of Cutting Systems With Chatter Suppression

Crynodeb

Mynediad at Ddogfen

Ôl bys

Dyfynnu hyn