Radiated emissions and experimental precautions of equipment with cables in GTEM cells

Zaid Muhi-Eldeen; Angela Nothofer; Christos Christopoulos; Steve Greedy

doi:10.1109/LAPC.2010.5666787

Radiated emissions and experimental precautions of equipment with cables in GTEM cells

Zaid Muhi-Eldeen, Angela Nothofer, Christos Christopoulos, Steve Greedy

Cyfadran Cyfrifiadureg, Peirianneg a Gwyddoniaeth

Allbwn ymchwil: Pennod mewn Llyfr/Adroddiad/Trafodion Cynhadledd › Cyfraniad i gynhadledd

Crynodeb

Any electric or electronic equipment sold within the European Union has to comply with the EC Directive on Electromagnetic Compatibility (EMC). To achieve compliance, the equipment must be tested for radiated/conducted emissions and immunity. A wide range of national and international testing methods and standards are in force such as the IEC 61000-40-20. However, standards in general lack of describing testing methods for equipment with cables. Since most devices and systems contain leads and cables; the current standards cannot be directly employed. In an effort to approach this crucial matter, we present the outcomes of measurements conducted on an EUT (metal box) with different cable bundle configurations, in conjunction with both, the correlation algorithm given in the standards and the repeatability concerns between different GTEM cells

Iaith wreiddiol	Saesneg
Teitl	LPAC: Loughborough Antennas & Propagation Conference
Is-deitl	Conference Proceedings (8-9 November, 2010, Loughborough University)
Cyhoeddwr	Institute of Electrical and Electronics Engineers
Tudalennau	133-136
ISBN (Argraffiad)	978-1-4244-7305-2
Dynodwyr Gwrthrych Digidol (DOIs)	https://doi.org/10.1109/LAPC.2010.5666787
Statws	Cyhoeddwyd - 8 Tach 2010
Digwyddiad	Antennas and Propagation Conference (LAPC) - Loughborough Hyd: 8 Tach 2010 → 9 Tach 2010

Cynhadledd

Cynhadledd	Antennas and Propagation Conference (LAPC)
Cyfnod	8/11/10 → 9/11/10

Mynediad at Ddogfen

10.1109/LAPC.2010.5666787Trwydded: CC BY-NC-ND

Dyfynnu hyn

Muhi-Eldeen, Z., Nothofer, A., Christopoulos, C., & Greedy, S. (2010). Radiated emissions and experimental precautions of equipment with cables in GTEM cells. Yn LPAC: Loughborough Antennas & Propagation Conference : Conference Proceedings (8-9 November, 2010, Loughborough University) (tt. 133-136). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/LAPC.2010.5666787

@inproceedings{e89712ca04624dd7b8f5483203cd05e7,

title = "Radiated emissions and experimental precautions of equipment with cables in GTEM cells",

abstract = "Any electric or electronic equipment sold within the European Union has to comply with the EC Directive on Electromagnetic Compatibility (EMC). To achieve compliance, the equipment must be tested for radiated/conducted emissions and immunity. A wide range of national and international testing methods and standards are in force such as the IEC 61000-40-20. However, standards in general lack of describing testing methods for equipment with cables. Since most devices and systems contain leads and cables; the current standards cannot be directly employed. In an effort to approach this crucial matter, we present the outcomes of measurements conducted on an EUT (metal box) with different cable bundle configurations, in conjunction with both, the correlation algorithm given in the standards and the repeatability concerns between different GTEM cells",

keywords = "gtem cells, radiated emissions, equipment with cables",

author = "Zaid Muhi-Eldeen and Angela Nothofer and Christos Christopoulos and Steve Greedy",

year = "2010",

month = nov,

day = "8",

doi = "10.1109/LAPC.2010.5666787",

language = "English",

isbn = "978-1-4244-7305-2",

pages = "133--136",

booktitle = "LPAC: Loughborough Antennas & Propagation Conference",

publisher = "Institute of Electrical and Electronics Engineers",

note = " Antennas and Propagation Conference (LAPC) ; Conference date: 08-11-2010 Through 09-11-2010",

}

Muhi-Eldeen, Z, Nothofer, A, Christopoulos, C & Greedy, S 2010, Radiated emissions and experimental precautions of equipment with cables in GTEM cells. yn LPAC: Loughborough Antennas & Propagation Conference : Conference Proceedings (8-9 November, 2010, Loughborough University). Institute of Electrical and Electronics Engineers, tt. 133-136, Antennas and Propagation Conference (LAPC), 8/11/10. https://doi.org/10.1109/LAPC.2010.5666787

Radiated emissions and experimental precautions of equipment with cables in GTEM cells. / Muhi-Eldeen, Zaid; Nothofer, Angela; Christopoulos, Christos et al.

LPAC: Loughborough Antennas & Propagation Conference : Conference Proceedings (8-9 November, 2010, Loughborough University). Institute of Electrical and Electronics Engineers, 2010. t. 133-136.

Allbwn ymchwil: Pennod mewn Llyfr/Adroddiad/Trafodion Cynhadledd › Cyfraniad i gynhadledd

TY - GEN

T1 - Radiated emissions and experimental precautions of equipment with cables in GTEM cells

AU - Muhi-Eldeen, Zaid

AU - Nothofer, Angela

AU - Christopoulos, Christos

AU - Greedy, Steve

PY - 2010/11/8

Y1 - 2010/11/8

N2 - Any electric or electronic equipment sold within the European Union has to comply with the EC Directive on Electromagnetic Compatibility (EMC). To achieve compliance, the equipment must be tested for radiated/conducted emissions and immunity. A wide range of national and international testing methods and standards are in force such as the IEC 61000-40-20. However, standards in general lack of describing testing methods for equipment with cables. Since most devices and systems contain leads and cables; the current standards cannot be directly employed. In an effort to approach this crucial matter, we present the outcomes of measurements conducted on an EUT (metal box) with different cable bundle configurations, in conjunction with both, the correlation algorithm given in the standards and the repeatability concerns between different GTEM cells

AB - Any electric or electronic equipment sold within the European Union has to comply with the EC Directive on Electromagnetic Compatibility (EMC). To achieve compliance, the equipment must be tested for radiated/conducted emissions and immunity. A wide range of national and international testing methods and standards are in force such as the IEC 61000-40-20. However, standards in general lack of describing testing methods for equipment with cables. Since most devices and systems contain leads and cables; the current standards cannot be directly employed. In an effort to approach this crucial matter, we present the outcomes of measurements conducted on an EUT (metal box) with different cable bundle configurations, in conjunction with both, the correlation algorithm given in the standards and the repeatability concerns between different GTEM cells

KW - gtem cells

KW - radiated emissions

KW - equipment with cables

U2 - 10.1109/LAPC.2010.5666787

DO - 10.1109/LAPC.2010.5666787

M3 - Conference contribution

SN - 978-1-4244-7305-2

SP - 133

EP - 136

BT - LPAC: Loughborough Antennas & Propagation Conference

PB - Institute of Electrical and Electronics Engineers

T2 - Antennas and Propagation Conference (LAPC)

Y2 - 8 November 2010 through 9 November 2010

ER -

Radiated emissions and experimental precautions of equipment with cables in GTEM cells

Crynodeb

Cynhadledd

Mynediad at Ddogfen

Ôl bys

Dyfynnu hyn