New approach for Development of Software for Layer Based micro-Machining

Krastimir Popov

doi:10.3850/4M2009RP001_9090

New approach for Development of Software for Layer Based micro-Machining

Krastimir Popov

Allbwn ymchwil: Pennod mewn Llyfr/Adroddiad/Trafodion Cynhadledd › Cyfraniad i gynhadledd › adolygiad gan gymheiriaid

Crynodeb

This paper proposes a new tool-path generation approach for layer-based micro machining (“conventional”, Laser or EDM milling). With this approach, the laser spot non-conformity or EDM tool wear is compensated for by varying the layer machining angle and start point while the material removal volumes are represented by a sequence of 2-D slices. Tool-path generation is performed taking into account the specific requirements of 3-D micro-machining. The capabilities of the developed CAM system have been verified experimentally.

Iaith wreiddiol	Saesneg
Teitl	Proceedings of the 6th International Conference on Multi-Material Micro Manufacture
Golygyddion	Volker Saile, Kornel Ehmann, Stefan Dimov
Man cyhoeddi	Forschungszentrum Karlsruhe, Germany
Cyhoeddwr	Research Publishing
Tudalennau	423
Nifer y tudalennau	427
Dynodwyr Gwrthrych Digidol (DOIs)	https://doi.org/10.3850/4M2009RP001_9090
Statws	Cyhoeddwyd - 2009

Mynediad at Ddogfen

10.3850/4M2009RP001_9090Trwydded: CC BY-NC-ND

Dyfynnu hyn

@inproceedings{959f8f46d470410380606ebb2108a5e5,

title = "New approach for Development of Software for Layer Based micro-Machining",

abstract = "This paper proposes a new tool-path generation approach for layer-based micro machining (“conventional”, Laser or EDM milling). With this approach, the laser spot non-conformity or EDM tool wear is compensated for by varying the layer machining angle and start point while the material removal volumes are represented by a sequence of 2-D slices. Tool-path generation is performed taking into account the specific requirements of 3-D micro-machining. The capabilities of the developed CAM system have been verified experimentally. ",

keywords = "Tool-path generation, layer-based micro machining",

author = "Krastimir Popov",

year = "2009",

doi = "10.3850/4M2009RP001_9090",

language = "English",

pages = "423",

editor = "Volker Saile and Kornel Ehmann and Stefan Dimov",

booktitle = "Proceedings of the 6th International Conference on Multi-Material Micro Manufacture",

publisher = "Research Publishing",

}

New approach for Development of Software for Layer Based micro-Machining. / Popov, Krastimir.

Proceedings of the 6th International Conference on Multi-Material Micro Manufacture. gol. / Volker Saile; Kornel Ehmann; Stefan Dimov. Forschungszentrum Karlsruhe, Germany : Research Publishing, 2009. t. 423.

Allbwn ymchwil: Pennod mewn Llyfr/Adroddiad/Trafodion Cynhadledd › Cyfraniad i gynhadledd › adolygiad gan gymheiriaid

TY - GEN

T1 - New approach for Development of Software for Layer Based micro-Machining

AU - Popov, Krastimir

PY - 2009

Y1 - 2009

N2 - This paper proposes a new tool-path generation approach for layer-based micro machining (“conventional”, Laser or EDM milling). With this approach, the laser spot non-conformity or EDM tool wear is compensated for by varying the layer machining angle and start point while the material removal volumes are represented by a sequence of 2-D slices. Tool-path generation is performed taking into account the specific requirements of 3-D micro-machining. The capabilities of the developed CAM system have been verified experimentally.

AB - This paper proposes a new tool-path generation approach for layer-based micro machining (“conventional”, Laser or EDM milling). With this approach, the laser spot non-conformity or EDM tool wear is compensated for by varying the layer machining angle and start point while the material removal volumes are represented by a sequence of 2-D slices. Tool-path generation is performed taking into account the specific requirements of 3-D micro-machining. The capabilities of the developed CAM system have been verified experimentally.

KW - Tool-path generation

KW - layer-based micro machining

U2 - 10.3850/4M2009RP001_9090

DO - 10.3850/4M2009RP001_9090

M3 - Conference contribution

SP - 423

BT - Proceedings of the 6th International Conference on Multi-Material Micro Manufacture

A2 - Saile, Volker

A2 - Ehmann, Kornel

A2 - Dimov, Stefan

PB - Research Publishing

CY - Forschungszentrum Karlsruhe, Germany

ER -

New approach for Development of Software for Layer Based micro-Machining

Crynodeb

Mynediad at Ddogfen

Ôl bys

Dyfynnu hyn