Experimental study of the effectiveness and exergetic efficiency of counter-rotating screw heat exchanger in a prebaked anode production plant

Mohamed MOHAMED, CK Tan, A. A. Abd El-Rahman, S. S. Wahid, M. Attalla, S. S. Ahmed

Allbwn ymchwil: Cyfraniad at gyfnodolynErthygladolygiad gan gymheiriaid

82 Wedi eu Llwytho i Lawr (Pure)

Crynodeb

The current paper aims to carry out an exergy and energy analyses of the counter-rotating screw heat exchanger currently used in the prebaked anode production plant (Green Carbon Anode Plant) in Nag Hammadi Aluminum Factories. In the experiments, the flow rate of thermal oil into the coke preheater was varied from 90 m3/h, 100 m3/h, 110 m3/h and 120 m3/h and its temperature was changed from 230–260C° with step of 10 °C each test. First- and Second-law analyses were employed to evaluate the thermodynamic efficiency of the system. Studies of the impact of measurement uncertainties revealed that while the calculated effectiveness of the heat exchanger is less sensitive to that, the dimensionless exergy destruction and exergetic efficiency are more significantly affected. Further sensitivity analysis also concluded that there is not much economical value in improving the accuracy of the measurements due to the potential cost of more accurate measuring devices. Further results also showed that the effectiveness and exergetic efficiency generally improved at higher mass flow rate and inlet temperature of the hot stream. The study also found that between 54% and 74% of the available energy (i.e. exergy) of the hot stream could be potentially wasted. A large proportion of exergy destruction was due to the relatively high mean temperature difference between the hot and cold streams, which was necessary to ensure satisfactory heating of the coke by conduction. To increase the exergetic efficiency of this heating process, it is proposed that the heat losses from the heat exchanger to the environment be minimized and that the mean temperature difference (for the same rate of heat transfer) should be reduced by redesigning the heat exchanger.
Iaith wreiddiolSaesneg
Tudalennau (o-i)1194-1201
CyfnodolynApplied Thermal Engineering
Cyfrol148
Dyddiad ar-lein cynnar27 Medi 2018
Dynodwyr Gwrthrych Digidol (DOIs)
StatwsCyhoeddwyd - 5 Chwef 2019

Ôl bys

Gweld gwybodaeth am bynciau ymchwil 'Experimental study of the effectiveness and exergetic efficiency of counter-rotating screw heat exchanger in a prebaked anode production plant'. Gyda’i gilydd, maen nhw’n ffurfio ôl bys unigryw.

Dyfynnu hyn