Anodic Generation of Hydrogen Peroxide by Using Manganese(III) Oxide Based Catalyst

Abdulaziz A.M. Abahussain; Abdulrahman F. Alharbi; M. H. Nazir; S.Z.J. Zaidi

doi:10.20964/2022.11.04

Anodic Generation of Hydrogen Peroxide by Using Manganese(III) Oxide Based Catalyst

Abdulaziz A.M. Abahussain^*, Abdulrahman F. Alharbi, M. H. Nazir^*, S.Z.J. Zaidi^*

^*Awdur cyfatebol y gwaith hwn

Allbwn ymchwil: Cyfraniad at gyfnodolyn › Erthygl › adolygiad gan gymheiriaid

23 Wedi eu Llwytho i Lawr (Pure)

Crynodeb

Electrochemical synthesis of hydrogen peroxide (H₂O₂) during oxidation of water oxidation could present a valuable method to generate this powerful oxidant. A simply structured Mn based electrode over a carbon polymer composite substrate (Mn(III)oxide/C)was manufactured by a thermal compression bonding method. The electrode was then used for water electrolysis at different electrode potentials and the amount of hydrogen peroxide generated was determined in an undivided electrochemical cell. The results show that the optimal values for H₂O₂ synthesis are anodic potentials of +0.5 V, +0.6 V and +0.7 V vs.

Iaith wreiddiol	Saesneg
Rhif yr erthygl	221130
Nifer y tudalennau	8
Cyfnodolyn	International Journal of Electrochemical Science
Cyfrol	17
Dynodwyr Gwrthrych Digidol (DOIs)	https://doi.org/10.20964/2022.11.04
Statws	Cyhoeddwyd - 10 Hyd 2022

Mynediad at Ddogfen

10.20964/2022.11.04Trwydded: CC BY

Version of Record with a CC BY LicenceFersiwn derfynol wedi’i chyhoeddi, 1.01 MBTrwydded: CC BY

Dyfynnu hyn

@article{749bdfdb52444779b345d5bc4abdbe33,

title = "Anodic Generation of Hydrogen Peroxide by Using Manganese(III) Oxide Based Catalyst",

abstract = "Electrochemical synthesis of hydrogen peroxide (H2O2) during oxidation of water oxidation could present a valuable method to generate this powerful oxidant. A simply structured Mn based electrode over a carbon polymer composite substrate (Mn(III)oxide/C)was manufactured by a thermal compression bonding method. The electrode was then used for water electrolysis at different electrode potentials and the amount of hydrogen peroxide generated was determined in an undivided electrochemical cell. The results show that the optimal values for H2O2 synthesis are anodic potentials of +0.5 V, +0.6 V and +0.7 V vs.",

keywords = "Carbon polymer, Hydrogen peroxide, Mn based electrodes, Water oxidation",

author = "Abahussain, {Abdulaziz A.M.} and Alharbi, {Abdulrahman F.} and Nazir, {M. H.} and S.Z.J. Zaidi",

note = "Publisher Copyright: {\textcopyright} 2022 The Authors. Published by ESG (www.electrochemsci.org). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/)",

year = "2022",

month = oct,

day = "10",

doi = "10.20964/2022.11.04",

language = "English",

volume = "17",

journal = "International Journal of Electrochemical Science",

issn = "1452-3981",

publisher = "Elsevier",

}

TY - JOUR

T1 - Anodic Generation of Hydrogen Peroxide by Using Manganese(III) Oxide Based Catalyst

AU - Abahussain, Abdulaziz A.M.

AU - Alharbi, Abdulrahman F.

AU - Nazir, M. H.

AU - Zaidi, S.Z.J.

N1 - Publisher Copyright: © 2022 The Authors. Published by ESG (www.electrochemsci.org). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/)

PY - 2022/10/10

Y1 - 2022/10/10

N2 - Electrochemical synthesis of hydrogen peroxide (H2O2) during oxidation of water oxidation could present a valuable method to generate this powerful oxidant. A simply structured Mn based electrode over a carbon polymer composite substrate (Mn(III)oxide/C)was manufactured by a thermal compression bonding method. The electrode was then used for water electrolysis at different electrode potentials and the amount of hydrogen peroxide generated was determined in an undivided electrochemical cell. The results show that the optimal values for H2O2 synthesis are anodic potentials of +0.5 V, +0.6 V and +0.7 V vs.

AB - Electrochemical synthesis of hydrogen peroxide (H2O2) during oxidation of water oxidation could present a valuable method to generate this powerful oxidant. A simply structured Mn based electrode over a carbon polymer composite substrate (Mn(III)oxide/C)was manufactured by a thermal compression bonding method. The electrode was then used for water electrolysis at different electrode potentials and the amount of hydrogen peroxide generated was determined in an undivided electrochemical cell. The results show that the optimal values for H2O2 synthesis are anodic potentials of +0.5 V, +0.6 V and +0.7 V vs.

KW - Carbon polymer

KW - Hydrogen peroxide

KW - Mn based electrodes

KW - Water oxidation

U2 - 10.20964/2022.11.04

DO - 10.20964/2022.11.04

M3 - Article

AN - SCOPUS:85140027918

SN - 1452-3981

VL - 17

JO - International Journal of Electrochemical Science

JF - International Journal of Electrochemical Science

M1 - 221130

ER -

Anodic Generation of Hydrogen Peroxide by Using Manganese(III) Oxide Based Catalyst

Crynodeb

Mynediad at Ddogfen

Ôl bys

Dyfynnu hyn