A load-pull approach to design an optimum load impedance and matching network for class-F RF power amplifier

B. A. Mohammed, A. S. Hussaini, R. Abd-Alhameed, N. A. Abduljabbar, H. A. Obeidat, I. T.E. Elfergani, J. Rodriguez, M. Fonkam, C. Nche, B. M. Mustapha

Allbwn ymchwil: Pennod mewn Llyfr/Adroddiad/Trafodion CynhadleddCyfraniad i gynhadleddadolygiad gan gymheiriaid

1 Dyfyniad (Scopus)

Crynodeb

This paper presents a Load-pull approach to design a fundamental load impedance and independent matching for class-F RF power amplifier high efficiency operation. The output used a transmitting type active integrated antenna. Power amplifier was design and simulated using Cree GaN FET CGH40010F transistor device at 2.62-GHz operating frequency. The performance of the network has improved by 78% power added efficiency at 30dBm output power.

Iaith wreiddiolSaesneg
Teitl2017 Internet Technologies and Applications, ITA 2017 - Proceedings of the 7th International Conference
GolygyddionSusan Liggett, Denise Oram, Rich Picking, Nigel Houlden, Julie Mayers, Stuart Cunningham, Vic Grout, Raed A. Abd-Alhameed, Yuriy Vagapov
CyhoeddwrInstitute of Electrical and Electronics Engineers Inc.
Tudalennau280-283
Nifer y tudalennau4
ISBN (Electronig)9781509048151
Dynodwyr Gwrthrych Digidol (DOIs)
StatwsCyhoeddwyd - 8 Tach 2017
Cyhoeddwyd yn allanolIe
Digwyddiad7th International Conference on Internet Technologies and Applications, ITA 2017 - Wrexham, Y Deyrnas Unedig
Hyd: 12 Sep 201715 Sep 2017

Cyfres gyhoeddiadau

Enw2017 Internet Technologies and Applications, ITA 2017 - Proceedings of the 7th International Conference

Cynhadledd

Cynhadledd7th International Conference on Internet Technologies and Applications, ITA 2017
Gwlad/TiriogaethY Deyrnas Unedig
DinasWrexham
Cyfnod12/09/1715/09/17

Ôl bys

Gweld gwybodaeth am bynciau ymchwil 'A load-pull approach to design an optimum load impedance and matching network for class-F RF power amplifier'. Gyda’i gilydd, maen nhw’n ffurfio ôl bys unigryw.

Dyfynnu hyn